User Forum

Subject :NSO    Class : Class 6

Ashwini magnetised a piece of iron rod using the stroking method as shown in the diagram below.

Which part of the iron rod becomes the North-seeking pole?
A P
B Q
C R
D S


no,the solution and ans are wrong because the poles are end point of the magnet ,so the north pole should be P

Ans 1:

Class : Class 6
A IS TH CORRECT ANSWER. In the figure they started stoking the iron piece from point P which is the starting of the iron rod. so the correct answer is A.....

Ans 2:

Class : Class 7
In the above process of magnetisation, the magnet makes its first contact with the iron rod on place R, so R would be the North pole of the magnetised iron bar.

Ans 3:

Class : Class 6
As north seeking pole is geographic south pole so R is north seeking pole. so , basically the south pole is the north seeking pole and as the north pole is facing downwards and starting with Q so south pole will be R . Hence, R is the north seeking pole and option C is the correct option.

Ans 4:

Class : Class 8
it has started magnetising from Q SO THATS WHY IT IS TELLING THAT Q WILL BE THE NORTH SEEKING POLE.

Ans 5:

Class : Class 7
A

Ans 6:

Class : Class 7
The correct answer is (B) because Q is the first point of contact.

Ans 7:

Class : Class 6
I didnt understand how it is R, can someone explain? Because according to me, the first point of contact is Q, but maybe that's not how it works....

Ans 8:

Class : Class 7
it will be P!!!!!!!!!!!!!

Ans 9:

Class : Class 6
IT WILL BE P!

Ans 10:

Class : Class 8
I agree with jigishal

Ans 11:

Class : Class 6
N POLE ALWAYS GIVE THAT'S WHY A

Ans 12:

Class : Class 8
The answer is B

Ans 13:

Class : Class 6
AS NORTH POLE INTRODUCED AT Q PART OF THE IRON ROD SO Q WILL BE NORTH POLE.

Ans 14:

Class : Class 7
The answer is P as you can clearly see the iron rod should allow the magnetism to flow like what happens when you chain a nail, even though you are affecting only the top part the whole screw is affected hence proving the answer is wrong

Ans 15:

Class : Class 9
It should be a

Ans 16:

Class : Class 7
Sorry R would be the south pole because of the reason:Q becomes the North pole, and R, where the magnet is lifted becomes the south pole.

Ans 17:

Class : Class 10
The magnet first makes contact with Q, so, it is the North Pole of the magnet

Ans 18:

Class : Class 8
B IS A WRONG ANSWER.

Ans 19:

Class : Class 7
The poles are end point of the magnet ,so the north pole should be P.

Ans 20:

Class : Class 7

Ans 21:

Class : Class 9
Yes it should be A ......because it is not possible that some of the iron bar is magnet and some is iron ....in the given figure starting of the stroke is point is Q but before that is point P which is starting of the rod so the CORRECT answer is A ..

Ans 22:

Class : Class 9
Will P be the North Pole or Q? So confusing!!🤔🤔

Ans 23:

Class : Class 9
At first, I also thought that it will be A but if you see the figure closely, you can see that the magnet first comes in contact with point Q, it is rubbed till R and is then lifted at R point. So, Point Q would be the north pole and the point R would be the south pole

Ans 24:

Class : Class 9
see the solution the magnet gets in contact with q so it is the correct ans

Ans 25:

Class : Class 8
If you clearly notice, the arrow is first coming in contact with Part Q, and the arrow is above in Part P. First, the magnet comes in contact with part Q, so when the iron rod is magnetised, Part Q will be North pole.

Ans 26:

Class : Class 9
Q or R?????? PLEASE EXPLAIN MASTER ANSWER!

Ans 27:

Class : Class 6
The correct answer is (B),Q because the magnetic contact starts on Q and not on P.

Ans 28:

Class : Class 7
A

Post Your Answer